增强PA6:可用于制作电动工具、齿轮、汽车配件等
发布时间:2014/9/29 来源:南京德尔隆公司 浏览:6770 次
增强PA6:高强度,耐温,耐磨
应用:电动工具、渔具、齿轮、汽车配件等
物性表:
牌号 Product Type |
测试标准 Test Standards |
单位 Units |
B230 | B706 | B706MO | B709 |
增强级 Reinforced |
||||||
物理性能 Physical Properties |
||||||
吸水率 Water Absorb(24h,23℃) |
ISO 62 | % | 1.2 | 1.1 | 1.1 | 1.1 |
密度 Density |
ISO 1183 | g/m3 | 1.23 | 1.36 | 1.36 | 1.46 |
机械性能 Mechanical Properties (23℃/50%r.h.) |
||||||
断裂拉伸强度 Tensile Stress,at break |
ISO 527 | MPa | 70 | 170 | 150 | 190 |
断裂伸长率 Elongation,at break |
ISO 527 | % | 10 | 2 | 2 | 1 |
弯曲强度 Flexural Stress |
IS0 178 | MPa | 85 | 200 | 175 | 235 |
弯曲模量 Flexural Modulus |
IS0 178 | MPa | 3500 | 7500 | 7200 | 10300 |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179-1eA | KJ/m2 | 6 | 12 | 10 | 14 |
简支梁冲击强度 Charpy Impact Strength |
ISO 179-1eU | KJ/m2 | 65 | 45 | 38 | 55 |
洛氏硬度 Rockwell Hardness |
R标尺 | 118 | 120 | 120 | 120 | |
热性能 Thermal Properties |
||||||
热变形温度0.45MPa Heat Deflection Temperature 0.45MPa |
ISO 75 | ℃ | 205 | 220 | 220 | 230 |
热变形温度1.80MPa Heat Deflection Temperature 1.80MPa |
ISO 75 | ℃ | 130 | 205 | 205 | 210 |
阻燃性能 Fire Resistance |
UL 94 | HB | HB | HB | HB | |
注塑成型温度范围 Injection Molding Temperature |
℃ | 230-260 | 230-260 | 230-260 | 240-270 | |
烘干温度/时间 Drying Temperature/Hour |
℃/H | 90/4-6 | 90/4-6 | 90/4-6 | 90/4-6 | |
其他 Others |
||||||
表面电阻率 Surface Resistivity |
IEC 93 | Ω | 1012 | 1012 | 1012 | 1012 |
介电强度 Electric Strength |
IEC 1183 | KV/mm | 20 | 18 | 18 | 18 |
线性成型收缩率 Linear Moulding Shrinkage |
ISO 2577 | % | 0.8-1.2 | 0.15-0.5 | 0.15-0.5 | 0.1-0.3 |
填充物 Fillers |
% | M15 | GF30 | GF30 | GF45 |